HENAN TMS MACHINERY CO., LTD
SCRAP RECYCLE, CREAT NEW VALUE.
Add to Cart
Φ200mm Briquette Size Manual Metal Briquette Press
Introduction of metal briquette press
Metal briquetting machine is also called vertical metal scrap recycling machine, metal chip merging machine, metal pressing machine, high-density metal chip briquetting machine. The working principle of this machine is to use hydraulic pressure to press the metal which can produce plastic deformation into a solid block with high density.
This metal briquette press can coldly compress powder and grain shaped cast steel chips, steel chips, Sponge iron, copper chips and aluminum chips into column-shaped lump with a density of >5T/M3, PLC control with automatic material feeding, lump discharging and high efficiency.
Application of metal briquette press
Metal chip briquetting machine is mainly used for cold pressing powdery, granular, small flake copper chips, iron chips, aluminum chips, alloy powder, stainless steel chip, iron ore powder, magnesium powder, copper powder and other metal chips Into a 3-5 kg cylindrical cake. It can also be used for pressing non-metal materials such as coke and slag powder
Advantages of metal briquette press
1. Hydraulic drive, stable operation, no vibration, safe and reliable;
2. Simple equipment foundation is needed;
3. It is controlled by PLC and can be operated manually or automatically.
4. Automatic feeding mechanism can be added according to user's requirements.
Working process of metal briquette press
First, put the loose material into the storage bin at the back of the machine. The material in the storage bin enters the forming
mold of the machine. The hydraulic rod directly above the machine keeps dropping, and the loose material is compressed into a compact high-density material blocks. The working efficiency of this machine is very high, it can produce 4-5 pieces in one minute. The machine adopts PLC program for automatic control, which can realize fully automatic continuous production.
Technical data of metal briquette press
| Sr. No. | Type name | Model or Data | ||||
| Main cylinder | Acceleration cylinder | Push block cylinder | Feeding cylinder | |||
| 1 | Nominal pressure | 5306KN | 358KN | 500KN | 150KN | |
| 2 | Inner diameter of cylinder | Φ520mm | φ135mm | Φ200mm | φ110mm | |
| 3 | Piston diameter | Φ300mm | Φ70mm | Φ80mm | φ70mm | |
| 4 | Stroke | 430mm | 440mm | 240mm | 390mm | |
| 5 | System Max.pressure | 25Mpa | 25Mpa | 16Mpa | 16Mpa | |
| 6 | Upper and lower beams | Integral steel casting | ||||
| 7 | Main pressure cylinder | Integral steel casting | ||||
| 8 | Motor | 2 sets | 30kw | |||
| 9 | Oil pump | 2 sets | 80MCY14-1B | |||
| 10 | Briquette density | ≥2.0T/m3 (Aluminum powder) | ||||
| 11 | Briquette size | Φ200mm (Aluminum powder) | ||||
| 12 | Work efficiency | 3-5 pieces / min | ||||
| 12 | Production | 8-10 ton / 8 hours (Aluminum powder) | ||||
| 13 | System control | PLC program control, with adjustable text display; cartridge valve block | ||||
| 14 | Cooling mode | 12m2 water cooler, automatic temperature control | ||||
| 15 | Operation mode | Manual / Full automatic | ||||
| 16 | Machine size | 2600*3200*4000mm | ||||
| 17 | Machine weight | 15000kg | ||||
